air blow

英 [eə(r) bləʊ] 美 [er bloʊ]

鼓风;吹气排屑

机械



双语例句

  1. Situation has become ever more serious.
    情况变得越加严重了。
  2. Stars are most easily seen when winds high in the air blow dust and clouds away.
    通常如果高空中有风的话,它会把高空中的灰尘与云层吹散,这样星星就能清晰可见。
  3. Condenser: V-type Up Blow Cooler, double air blow, the best cooling effect.
    冷凝器:V字型上吹式散热机组,双面吸风,冷凝效果佳。
  4. The bottom, top, air blow, air ejection and heat ejection can be chosen to raise the reliability of the equipment;
    可选配底部、顶部、送风、排风、散热,提高设备运行可靠性;
  5. Having the advantages of uniform air blow, high heating efficiency and high drying efficiency, the utility model is especially suitable for drying fire fighting garments in fire fighting teams.
    该烘干机具有送风均匀、加热烘干效率高,特别适用于消防队伍的消防服烘干。
  6. The operation principle of air conditioner with cross air blow and adjustment process are introduced.
    介绍侧吹风空调工作原理及调节过程。
  7. Technical Reformation for Steam Superheater in Air blow Gas Recovery System
    吹风气回收系统蒸汽过热器的技术改造
  8. Air blow installation to eliminate defect which causing from stripped jacket. air uncurler for knit fabric
    吹气装置可清除剥皮后所遗留之线屑。针织物喷气式剥边装置
  9. You have to drive the famous MiG-29 fighter planes in the air blow F16 fighter!
    你要驾驶着著名的米格29战机在空中痛击F16战机!
  10. Dushanzi Oil Refinery adopts activated sludge process to treat its industrial waste water. The treating technology is air blow aeration.
    独山子炼油厂的工业废水处理采用活性污泥法,处理工艺是鼓风曝气。
  11. Energy consumption analysis of high-pressure circular air blow conditioner system
    高压环吹风空调机组能耗分析
  12. The cross air blow of spinning equipment, the spinning pack and the improvement of winding angle in take-up equipment were emphatically analysed.
    重点分析了纺丝设备的侧吹风,纺丝组件以及在卷绕设备上卷绕包角上的改进。
  13. Oxygen-enriched air blow for copper matte converter possesses obvious advantages of thermodynamics and kinetics, which has a great potential in energy saving due to fume decreased. Energy saving model of Oxygen enriched blow process and the utilization of heat are studied on base of dynamic heat balance.
    冰铜富氧吹炼具有明显的热力学和动力学优势.由于烟气量的减少,节能潜力很大.本文在动态热平衡的基础上重点研究了富氧吹炼过程节能模型和富余热量的利用。
  14. The energy saving measures for cross air blow conditioner system were analyzed from the aspects of return air system design and automatic control system configuration.
    分析了纺丝侧吹风空调机组及送回风系统设计及其自动控制系统配置的节能措施。
  15. The Numerical Simulation for Gas-liquid Phase Flow Inner Air Blow Tank with Machinery Agitation
    机械搅拌通风发酵罐内气液两相流的仿真模拟
  16. Weighted magnification for air blow tank with machinery agitation
    机械搅拌通风发酵罐的加权放大
  17. The CFD ( Computational Fluid Dynamic) model for air blow tank with machinery agitation is set up accurately by model tools, the internal gas-liquid flows field is simulation using two-phase Euler-Euler model.
    本文采用实体建模、CFD(计算流体动力学)前置处理器等工具建立机械搅拌通风发酵罐CFD计算模型,应用两相流的欧拉模型模拟发酵罐内流场的气、液两相流动。
  18. Optimization of PET staple cross air blow technology
    涤纶短纤维环吹风工艺优化
  19. Study on 30M~ 3 standard form air blow fermentor for deep layer fermented vinegar
    30M~3标准型通风发酵罐进行液态深层米醋发酵的应用研究
  20. The production process of PET slub FDY was introduced. The effects of chip quality, spinning temperature, cross air blow and winding process on the production of PET slub FDY were discussed.
    介绍了涤纶FDY竹节丝的生产过程,探讨了切片质量、纺丝温度、侧吹风、卷绕工艺对生产FDY竹节丝的影响。
  21. The annealing device was installed under the spinneret, the air window filter sieve density was increased, the suitable air temperature, air speed and relative humidity were selected, the distance from the spinneret to the cross air blow was shortened.
    喷丝板下安装缓冷装置,增加风窗过滤网的密度,选择合适的风温、风速和相对湿度,缩短喷丝板至侧吹风距离等。
  22. The effects of impurity particles in polyester melt, melt temperature, spin pack, cross air blow speed, oiling method, draw ratio and heat roll temperature on the quality of fine denier PET fiber were discussed.
    讨论了聚酯熔体中杂质颗粒、熔体温度、纺丝组件、侧吹风速度、上油方式、拉伸倍数与热辊温度等因素对涤纶细旦丝的影响。
  23. In addition, the finite-element analysis is made with the computer. The optimal blow network of the air blow field is drawn and equi-potential lines are printed automatically, thus providing data and basis for ventilation safety.
    通过计算机进行有限元分析,摄取风场优化流网,且自动打印出等势线,为通风安全提供数据和对策依据。
  24. The research for the technology scheme of air blow for removing moisture at blast furnace
    高炉鼓风脱湿技术方案的研究
  25. Combined with the melt transfer, spinning temperature, spinning package, quench air blow, cluster and the finish process conditions, high quality of micro-fine denier POY could be successfully produced on convention melt direct spinning production line.
    结合熔体输送、纺丝温度、纺丝组件、缓冷器应用、冷却、集束及上油工艺条件,在常规熔体直接纺生产线上成功地生产出高质量微细旦POY。
  26. The cold air blow plays an important role in the genesis and development of typhoons in wintertime.
    冬季热带气旋的生成发展和消亡都与冷空气的活动关系密切。
  27. Adjustment process control of air conditioner with cross air blow
    侧吹风空调调节过程控制
  28. A new type of axially movable vane turbocharger was developed in this dissertation. The structure of the nozzle, shape of vane, matching performance with a diesel engine and nozzle static pressure air blow test were investigated in detail.
    本文就新开发的轴向移动喷嘴可变几何截面增压器的构造、叶片形状、以及该增压器的发动机匹配性能和喷嘴流动损失进行了详细的研究。
  29. The static pressure air blow test and engine matching test of three sets of high speed and low speed vanes were conducted.
    对所设计的三种高速叶片和三种低速叶片分别进行了冷态条件下的静吹风试验和实机匹配试验。
  30. Three groups were included according to different aeration method, namely, micro-nanometer aerated floating bed, air blow aerated floating bed and non-aerated floating bed ( the control group).
    根据曝气方式不同,实验分为3组:微纳米曝气浮床、普通鼓风曝气浮床和无曝气浮床(对照组浮床)。